Allied Telesis AT-WA7500 - Manual (Page 158)

6 - Configuring Security
158
‰ Check Allow TTLS box, if you are implementing an 802.1x security
solution and you want to use TTLS. You must also enter a User
Name and Password that matches an entry in the authentication
server.
6. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
7. Repeat Steps 1 through 6 for each access point in your spanning tree.
All access points must have the same IAPP secret key to communicate
with each other.
In the access point that contains the master radio, select Maintenance
then AP Connections. The AP Connections screen lists the station radios
(including ones in other access points) that are communicating with the
master radio. For help, see Viewing AP Connections on page 195.