Allied Telesis AT-WA7500 - Manual (Page 254)

B - Default Settings
254
Default Settings
The factory default settings for the access points are listed in this section.
You can record the settings for your installation in each table for
reference.
TCP/IP Settings
Menu Defaults
Parameter
Name Range Default Your Site?
IP Address 4 nodes, 0 to
255 0.0.0.0
IP Subnet Mask 4 nodes, 0 to
255 255.255.255.0
IP Router
(Gateway) 4 nodes, 0 to
255 0.0.0.0
DNS Address 1 4 nodes, 0 to
255 0.0.0.0
DNS Address 2 4 nodes, 0 to
255 0.0.0.0
DNS Suffix 1 0 to 31
characters (blank)
DNS Suffix 2 0 to 31
characters (blank)
DHCP Mode Always use
DHCP, Use
DHCP if IP
Address is Zero,
Disable DHCP,
This AP is a
DHCP Server Use DHCP if IP
Address is Zero
DHCP Server
Name 0 to 31
characters (blank)
Auto ARP
Minutes 0 to 120 5