Allied Telesis AT-WA7500 - Manual (Page 129)

AT-WA7500 User’s Guide
129
Note
You should not filter HTTP, Telnet, SNMP, and ICMP frames if you
are using IP tunnels, because these filters are used for configuring,
troubleshooting, and upgrading access points.
Using Predefined Subtype Filters
You can configure the access point to pass or drop certain predefined
frame subtypes.
To configure predefined subtype filters
1. From the Main Menu, select IP Tunnels then Predefined Subtype
Filters. The Predefined Subtype Filters screen appears.
2. For each frame subtype field, check or clear the check box to
configure if the frame subtypes are passed or are dropped. If you
check the check box, the frame subtype is allowed to pass.
3. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.