Using the rejected list – Allied Telesis AT-WA7500 User Manual
Page 186
7 - Configuring the Embedded Authentication Server (EAS)
186
Using the
Rejected List
The Rejected List screen displays the users and devices that have been
rejected by the EAS. You can use this list to discover which users and
devices may need to be added to the database. When using the web
browser interface, you can immediately add previously rejected end
devices to the database. You do not need to select Submit Changes or
reboot the access point.
Note
When you reboot the access point, the rejected list is cleared.
To view the rejected list
1. Log in to the access point whose EAS you are using.
2. From the Main Menu select Security then Embedded
Authentication Server and then Rejected List. The Rejected List
screen appears.
3. Determine which users and devices you need to add to the database.
The Rejected List values are described below:
Type
Lists the type of authentication that failed. The type can be: Login,
ACL, TTLS/PAP, TTLS/CHAP, TTLS/EAP, TTLS/MSCHAP, TTLS/
MSCHAP-V2, PEAP/MSCHAP-V2, PEAP/GTC, or TLS.
User Name
Lists the value that was passed in the User Name field of the
RADIUS server database during the failed attempt.
Last Time
Indicates how long ago the last authentication was attempted.
Count
Indicates how many times the authentication failed.
NAS IP Address
Displays the IP address of the RADIUS server that rejected the
client.
4. Add users and devices to the database. For help see Adding Entries