Allied Telesis AT-WA7500 - Manual (Page 200)

8 - Managing, Troubleshooting, and Upgrading Access Points
200
Table 25 Find This Access Point
Restoring the
Access Point to
the Default
Configuration
You may need to restore the access point to the factory default
configuration. For a list of the default settings, see Default Settings in
Appendix A. To restore the access point to the default configuration, you
can use:
‰ AT-WA7500 Family Configuration Wizard. For more information,
run the wizard.
‰ Web browser interface. For help, see Using a Web Browser
Interface on page 218.
Using the AT-WA7500 Family Configuration Wizard
For help installing the AT-WA7500 Configuration Wizard, refer to the
AT-WA7500 Family Configuration Wizard Technical Brief. This document
is located at
www.alliedtelesyn.com .
To restore the access point to the default configuration
1. Start the utility.
Power Wireless
#1 Wireless
#2 Wired LAN Root/ Error Description
ON Flashing Flashing Flashing ON This access point is the one
you are trying to locate.