Allied Telesis AT-WA7500 - Manual (Page 161)

AT-WA7500 User’s Guide
161
6. Configure the RADIUS server by selecting Select a RADIUS server for
ACL authorization. The RADIUS Server List screen appears.
7. For each RADIUS server, enter the IP address or DNS name, enter the
shared secret key, Port number, and check ACL.
Note
If you enter more than one RADIUS server, the other RADIUS servers
simply serve as backup servers. The access point uses the first
RADIUS server (starting with Server 1) whose IP address/DNS name
and secret key are the same as one in the list.
8. Configure the database. Enter the MAC address for each end device
radio that is allowed to communicate with the network.
‰ In the EAS database, in the Type field choose ACL and then enter
the MAC address for each end device radio. For help, see Chapter
7, Configuring the Embedded Authentication Server (EAS) on
page 175.
‰ For help configuring an external RADIUS server database, see the
documentation that came with your server. In the database, you
will also need to enter the ACL RADIUS client password. The
default password is wireless (case-sensitive).