Allied Telesis AT-WA7500 - Manual (Page 143)

AT-WA7500 User’s Guide
143
Configuring
Global RF
Parameters
Use global RF parameters to set various parameters on the access points.
If you are configuring the root access point and you check the Set
Globally check box, the value for that parameter is set globally for all
access points and wireless end devices in the network. If you are
configuring the root access point and you clear the Set Globally check
box or if you are not configuring the root access point, each device uses
its local setting.
To configure global RF parameters
1. From the Main Menu, select Spanning Tree Settings then Global RF
Parameters. The Global RF Parameters screen appears.
2. Configure the Global RF parameters. Click the links in the Global RF
Parameters menu to set more parameters. These parameters are
described below:
Perform RFC1042/DIX Conversion
Determines how the access point will handle the conversion of
RFC1042/DIX frames that are received on its 802.11b or 802.11a
ports.
Check this check box if the frames that are received and have a
protocol type equal to a value in the RFC1042 types to pass
through list are forwarded without conversion. If the frame has a
protocol types that is not found in the list, it will be converted to
DIX format before it is forwarded.