Allied Telesis AT-WA7500 - Manual (Page 127)

AT-WA7500 User’s Guide
127
You can set the default action and scope for general and specific frame
types:
Allow/ Pass
Check or clear this check box. Check this check box to pass all
frames of the type. Clear this check box to drop all frames of the
type.
Scope
Set scope to Unlisted or All. If you select All, then all frames of that
type are unconditionally passed or dropped, depending on the
action you specified. If you select Unlisted, then frames are passed
or dropped only if the frame type is not listed in the predefined or
customizable tables.
To use IP tunnel frame type filters
1. From the Main Menu, select IP Tunnels then Frame Type Filters. The
Frame Type Filters screen appears.