Allied Telesis AT-WA7500 - Manual (Page 201)

AT-WA7500 User’s Guide
201
2. In the Select Task field, choose Restore Access Point Network to
Factory Default Values.
3. In the Current IP Address field, enter the IP address of the access point
you want to restore to factory defaults.
4. Disconnect and reconnect the power cable to the access point. The
access point has no ON/OFF switch, so it boots as soon as you apply
power.
5. Immediately seelct Restore. The Status box lets you know when the
default configuration has been restored. You will need to reconfigure
your network settings.
6. To close the utility, from the File menu choose Exit.
For more help using the utility, from the Help menu choose Contents.
Using the Web Browser Interface
1. In the menu bar, select Save/Discard Changes.