Allied Telesis AT-WA7500 - Manual (Page 31)

AT-WA7500 User’s Guide
31
b. In the Root Priority field, enter a number other than 0.
c. In the Secondary LAN Bridge Priority field, enter 0.
d. In the Secondary LAN Flooding field choose Disabled.
8. If the roaming end devices will be roaming across an IP router, you
must configure IP tunnels. For help, see Configuring IP Tunnels on
page 124
9. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes then Save Changes and
Reboot. For help, see Saving Configuration Changes on page 41.
Example - Configuring an 802.11b Bridge
In this example, each access point only has one 802.11b radio. Since the
designated bridge only has a station radio, wireless end devices can only
communicate with the root access point. However, wired devices on the
secondary LAN can communicate with the primary LAN.
Host
Primary LAN Secondary LAN
Root
Designated
bridge