Allied Telesis AT-WA7500 - Manual (Page 115)

AT-WA7500 User’s Guide
115
A switch may also be configured statically to always forward
specific VLANs to specific ports. You should clear this check box
for a static configuration.
Secondary LAN Bridge Priority
Determines when this access point can become the designated
bridge in a secondary LAN. The access point that meets all the
other requirements and has the highest secondary LAN bridge
priority becomes the designated bridge.
The secondary LAN bridge priority can be a value from 0 to 7. If
you set this value to 0, the access point can never become the
designated bridge.
For more information, see About Secondary LANs and
Designated Bridges on page 110.
Secondary LAN Flooding (Outbound) (Designated bridge only)
Specifies the types of frames it forwards from the primary LAN to
the secondary LAN.
Choose Disabled if no flooding occurs unless the root access point
(in the Global Flooding screen) enables the Multicast or Unicast
Outbound to Secondary LANs parameter.
Choose Enabled if multicast and unicast flooding occurs unless
the root access point (in the Global Flooding screen) disables
multicast or unicast flooding.
Choose Multicast if multicast flooding occurs unless the root
access point (in the Global Flooding screen) disables multicast
flooding.
Choose Unicast if unicast flooding occurs unless the root access
point (in the Global Flooding screen) disables unicast flooding.
3. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
4. (Optional) Configure security by selecting Spanning Tree Security.
For help, see Establishing Secure Communications Between
Access Points on page 156.