Allied Telesis AT-WA7500 - Manual (Page 24)

1 - Getting Started
24
b. In the Node Type field choose Station, and then select Submit
Changes.
4. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
5. Configure the master radio (in the WAP) to communicate with the
end devices. For help, see Chapter 4, Configuring the Radios on
page 85.
6. Configure the master radio in the access point.
a. From the Main Menu, select the link corresponding to the master
radio. The radio screen appears.
b. In the Node Type field, choose Master and then select Submit
Changes.
7. Configure the access point to be a root access point. For help, see
About the Primary LAN and the Root Access Point on page 109.
8. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
Example - Configuring an 802.11b WAP With Roaming
End Devices
In this example, there is one 802.11b radio in the access point and there are
two 802.11b radios (IEEE 802.11b-1 and IEEE 802.11b-2) in the WAP.
Wireless end devices can roam between the WAP and the access point.
Host
Ethernet
WAP
Access
point