Allied Telesis AT-WA7500 - Manual (Page 163)

AT-WA7500 User’s Guide
163
To configure WEP 64/128/152 security
1. From the Main Menu, select Security then IEEE 802.11b Radio
Security or IEEE 802.11a Radio Security. The appropriate radio
screen appears.
2. Check Enable WEP Encryption then select Submit Changes.
3. Configure the parameters for WEP configuration. To ensure
maximum security, configure each WEP key with a different WEP
code. These parameters are described below:
Enable WEP Encryption
Determines if you are using WEP 64/128/152 security.
Allow Unencrypted Clients
Determines if the access point will receive transmissions from
wireless end devices that are not using WEP encryption.
Check this check box to accept transmissions from devices that
are not using WEP encryption.