Managing the access points – Allied Telesis AT-WA7500 User Manual
Page 192
8 - Managing, Troubleshooting, and Upgrading Access Points
192
Managing the Access Points
There are several methods that you can use to manage the access
points. You can use:
AT-WA7500 Family Configuration Wizard. You can use this wizard
to add and replace access points, rotate security parameters,
clone access points, and view changes from factory defaults. You
install this wizard from the AT-WA7500 CD that shipped with the
access point. This wizard discovers (and can configure) all the
access points that are on the same Ethernet segment and subnet
as the PC it is installed on. For more information, run the wizard.
a web browser. For help, see Using a Web Browser Interface on
a communications program, such as HyperTerminal. For help, see
Using a Communications Program on page 35.
a telnet session. Go to an MS-DOS prompt and type telnet
IPaddress, where IPaddress has the form x.x.x.x and x is a number
from 0 to 255. For more help, see Using a Communications
Program on page 35. The interface looks similar.
an SNMP management station. For help, see Using Simple