Allied Telesis AT-WA7500 - Manual (Page 25)

AT-WA7500 User’s Guide
25
Table 4 Configuring an 802.11b Access Point and WAP Parameters
You need to configure the wireless end devices to have the same SSID,
LAN ID, and frequency as the WAP master radio (IEEE 802.11b-1). You do
not need to configure any secondary LAN settings because the WAP is
not connected to a secondary LAN.
Allied Telesyn recommends that you always implement some type of
security.
Screen Parameter Access Point
IEEE 802.11b WAP IEEE
802.11b-1 WAP IEEE
802.11b-2
IEEE 802.11b
Radio Node Type Master Master Station
SSID ATILAN ATILAN ATILAN
Spanning Tree
Settings LAN ID 11 11 11
Root Priority 5 0 N/A
Ethernet
Bridging
Enabled Checked Checked N/A