Allied Telesis AT-WA7500 - Manual (Page 125)

AT-WA7500 User’s Guide
125
Multicast Address (Enable IGMP checked only)
Enter the Class D IP multicast address. You also need to enter this
IP address in the root access point’s IP address list. The Internet
Assigned Numbers Authority has allocated 224.0.1.65 for Allied
Telesyn’s Inter-Access-Point Protocol (IAPP).
3. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
Configuring the
IP Address List
On the root access point and root candidates, the IP address list contains
the IP addresses of all the access points at the endpoint of the IP tunnels.
To configure the IP address list
1. From the Main Menu, select IP Tunnels then IP Addresses.
2. If you enabled IGMP, enter the Class D IP multicast address. The
default is 224.0.1.65.
3. Enter the IP addresses or DNS names of all the access points that can
be the endpoints of IP tunnels.
4. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.