Samsung SM-C105AZWAATT - Manual (Page 91)

Camera 84
6. Locate and touch the selected image to open it in the
preview window.
Important! Neither device must be in Lock mode or
displaying the Lock screen. They must both be
active and unlocked. It is recommended that the
target device be on the Home screen.
7. Place the two active NFC-enabled devices back to back
to begin (1).
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the Touch to beam screen, touch the reduced
image preview to begin the transfer (2).
9. When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient will then
see the transferred file displayed on their screen.
Place devices back to back
Touch the source image