Samsung SM-C105AZWAATT - Manual (Page 216)

209
7. If you selected Set-top box, Select your Set-top Box
brand.
8. From the Test Set-top box screen, touch the CH
button up or down, then respond to the Setup prompt
according to whether the channel changed, by tapping
Send this code 1 again; No, test next code 2; or Yes,
this code 1 works.
After you successfully change the channel using
WatchON, the WatchON Easy remote screen displays.
For more information, refer to “Using WatchON” on
page 210.
Satellite System Set-Top Box Setup
1. If you have a satellite system, select the Satellite Box
Brand from the available list. For example, DirectTV ® .
• If your brand does not appear in the list, touch Show other
brands and follow the on screen instructions.
Important! You must configure your set top box for Infra Red
(IR) communication with your device. If you do not
select More info below and follow the on screen
instructions you may not be able to properly use
WatchON with your satellite system.
2. When prompted to Enable IR, touch More info to learn
how to configure your set top box to receive and
respond to IR controls.
3. Only after completing the IR setup process and
programming your box, press (Back).
Note: This IR programming of your set top box is a one-time
process and once successful should not need to be
repeated.