Customizing your remote – Samsung SM-C105AZWAATT User Manual

Page 215

Applications 208

Customizing Your Remote

1. From the top of the main screen, touch

(Remote

Control).

2. From the Universal Remote Control pop-up, touch

Continue.

3. From the Select your TV brand screen, touch your

TV’s manufacturer name.

• If you have a brand of TV not listed or you are using a projector,

select from one of the following two options. Choose from

either Show other brands or I have a home

projector.

4. Aim your device at the TV/projector and touch

(Power) to confirm the set up process completed

successfully by powering your TV/projector on.

Note: The process of the initial TV activation can take up to 10

seconds. Please do not press the

(Power) button

again

5. If the TV turned on, touch Yes, this code 1 works.

– or –

If the TV did not turn on after tapping

(Power) and

waiting 10 seconds, touch No, test next code 2 or

Send this code 1 again.

6. From the Select your channel source screen, select

the entry that corresponds to your current channel

selection method:

• Set-top Box: selected when changing channels is done via a

receiver box. Channels are not changed via the TV remote but

rather through the receiver/box.

Tip: If you have a satellite system and a set-top box, see

• My [BRAND] TV: selected when a signal is fed directly into

the TV and no box is used. Channels are changed directly on

the TV by using the TV remote and not a box’s remote.

Note: Try matching your current channel selection method.