Videotec ULISSE COMPACT THERMAL - Manual (Page 52)

EN - English - I
nstruc
tions manual
50
Error E3-PATROL WITHOUT PRESET or
Error E4-PATROL, 1 PRESET ONLY The presets have not been programmed.
Program two or more presets and then update the Patrol
configuration menu ("10.2 Saving the current position (Preset)",
page 44 and "9.6.4.6 Patrol Menu", page 36).
Error E5-IR TEMP. TOO HIGH or
error E6-IR FAULT. The infrared illuminator is not working properly.
Seek assistance.
Error E7-PRST. NOT CONFIGURED. Recalling of a non programmed preset.
Save the preset using the relative control ("10.2 Saving the
current position (Preset)", page 44).
Error E8-TOUR NOT CONFIGURED. Recalling of a non configured Tour.
Save the Tour using the relative control ("10.6 Recalling a
pattern (Tour)", page 45).
Error E9-TEMP. TOO LOW The environment temperature is too low. The movements
of the P&T unit is blocked to prevent mechanical damage.
Alarm AL6 :WATER LEVEL LOW Low wiper liquid level.
Fill the tank of the pump using the suitable wiper liquid.
Tab. 16