Videotec ULISSE COMPACT THERMAL - Manual (Page 27)

EN - English - I
nstruc
tions manual
25
9.4 How to change the numeric
fields
Move the cursor to the parameter to be changed,
then confirm.
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+ 0.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
Fig. 39
The first digit in the numeric field to be changed will
flash and the last line of the display will show the
accepted limits for the field. Move in the field (left
and right) and change the sign or the numeric value
(up and down).
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+000.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
min:-180.00 max:+179.99
Fig. 40
After making the change, confirm. The cursor returns
to the left and the modified figure stops flashing.
The field will be forced to the minimum or maximum
allowed value if you try to insert a value outside the
limits.
9.3 How to change the settings
Move the cursor to the parameter to be changed and
confirm. The field will start flashing, indicating that
it is in change mode. Operating the joystick (up and
down) will show the alternative choices.
ADVANCED
------------------------
1 ZOOM SPEED : 7
2>DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 37
After identifying the desired selection, confirm.
ADVANCED
------------------------
1>ZOOM SPEED : 7
2 DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 38
The parameter will stop flashing to confirm the
choice.