HP XP P9000 Performance Advisor Software - Manual (Page 49)

Table 5 Preferred Mode of Data Collection in HP XP P9000 Performance Advisor v5.5.1
Preferred Mode of Data Collection Feature
OutBand (24K) License
OutBand Snapshot Vvols
InBand If Arary view -> LDEV screen does not CA J, SNAP shot
related metrics/status
OutBand MP Blade LDEVs
After the host agents appear under the Host Information tab, the following details from the command
devices are also displayed in the Configuration Collection table, under the Configuration Collection
tab:
Description Screen elements
Displays the DKC number and the user-friendly name of
the XP or the P9000 disk array. Array
Displays the system name of the host. Host ID
Displays the port that is configured to communicate data
between the command device (on an XP or a P9000 disk
array) and the associated host agent. Port
Displays the ID of the LDEV that is configured as a
command device. Cmddev
Displays the device file for the command device. DeviceFile
Displays —, if the configuration collection is not yet initiated
for an XP or a P9000 disk array. After the configuration Last Collection TimeStamp
data collection is initiated, the Last Collection displays the
date and time when HP XP P9000 Performance Advisor
receives the complete configuration data from the XP or
the P9000 disk array.
Displays —, if configuration collection is not yet scheduled
or a one-time configuration data collection is performed Frequency
on the XP or the P9000 disk array. The schedule type and
duration (date and time stamp) are displayed under
Frequency, only if a configuration data collection is
scheduled.
Displays the following icons based on the status of the
configuration data collection that you initiated. Hover the Collection Status
Collecting configuration data 49