HP XP P9000 Performance Advisor Software - Manual (Page 151)

This file includes the following details:
•
The XP or the P9000 disk array serial number for which the report is generated.
•
The port IDs on the XP or the P9000 disk array. The port type, such as Fibre or FCoE (applicable
only for P9000 disk arrays) is also displayed beside the CHIP port ID.
•
The performance data collection interval time stamps.
•
The maximum and the minimum frontend I/Os on a port over an entire collection interval.
•
The average frontend I/Os on a port over an entire collection interval.
•
The maximum and minimum frontend throughput in MB/s that was read from or written to the
port in the last 30 seconds of the collection interval.
•
The average frontend throughput in MB/s that was read from or written to the port over an
entire collection interval.
•
The type of the port, such as the Fibre (Target), Fibre (Cont Acc Target), Fibre (Cont Acc
Initiator), or the Fibre (Ext-Lun Initiator).
•
The associated E-Seq, which is the Ext-Lun provider's serial number for the E-seq(s) array.
clpr_exportDB-array_serial_number_.csv
This file includes the following details:
•
The XP or the P9000 disk array serial number for which the report is generated.
•
The CLPR IDs on the XP or the P9000 disk array.
•
The performance data collection interval time stamps.
•
The MB/s of cache used over an entire collection interval.
•
The percentage of the writes that are held in the cache, yet to be transferred to the disks over
an entire collection interval.
•
The MB/s of the continuous access asynchronous sidefile usage over an entire collection
interval.
•
The data accessed or the reads on a single CLPR over an entire collection interval.
mp_exportDB-array_serial_number_.csv
IMPORTANT: This file is created only when you save or schedule the Export DB report for a
P9000 disk array.
This file includes the following details:
•
The P9000 disk array serial number for which the report is generated.
•
The MP blade IDs, the cluster # and the blade locations for the MP blades.
•
The average percentage of utilization over the entire collection interval. It is calculated as the
utilization of all the individual processors in the MP blade.
•
The performance data collection interval time stamps.
•
The processors on an MP blade and their utilization percentage over the entire collection
interval.
•
The processing types and the respective MP busy time.
The MP busy time indicates the time taken by an MP blade to process the request it receives
from the associated processing type.
rgutil_exportDB-array_serial_number_.csv
Creating and viewing Export DB CSV files 151