HP XP P9000 Performance Advisor Software - Manual (Page 262)

The MP Blades component type displays the individual MP blades associated with the host group.
At this level, you can view the overall utilization of all the MP blades. Further, the utilization of
each MP blade is displayed at the individual MP blade level.
For description of the Ports, RAID Groups, and LDEVs component types, see 'Host Groups navigation
path 'For the XP disk arrays'.
In the above mentioned selections, the LDEVs are displayed in the descending order, where the
maximum utilized LDEV is displayed first followed by the subsequent, and least utilized LDEVs.
Following is the component selection path for MP blades:
Host Groups > Individual host groups > MP Blades (component type) > Individual MP blades. Each
MP blade further displays the following:
•
Individual MP blade > Processors (component type) > Individual MPs.
•
Individual MP blade > LDEVs (component type) > Individual LDEVs.
In the above image, under Host Groups for the P9000 disk array 10090:
•
Under the main category Host Groups, XPPA247_HYP_V_NEW_BLD_BAY6 is one the individual
host group. The number 0 indicates the aggregate of the average I/Os from each LDEV
belonging to Host Group
•
A:2E is a PVol under the LDEVs node.
•
S-Vol is a component type under PVol. The number 1 beside S-vol displays the number of Svols
assigned to the PVol. A:1E is an Svol that is associated with the PVol A:2E.
262 Using charts