beautypg.com

HP XP P9000 Performance Advisor Software User Manual

Page 131

background image

NOTE:

For the Raid Group, the Host Group branch is traversed first, followed by the Pool branch,
Back-end, and finally the Drive Types branch.

You can search for External Raid Groups as well by selecting Raid Group from the component
drop-down list and querying for a specific External Raid Group.

When searching for concatenated Raid groups, you should enter a part of Raid group name
and not the entire name. For example: If you want to search for concatenated Raid Group
"1-1 1-2", then enter either 1-1 or 1-2 in the search box, and click Find Next.

For the Port, the Host Group branch is traversed first followed by the Front-end branch.

For Host Group, the Host group is highlighted first in the host group branch followed by the
Pools branch.

For performing search in the Host Group, you have to include the entire host group name.
If you want to search for Host Group PA-CVXPt2, then you have to type the entire name,
considering the case sensitivity to navigate in host groups and the Pools branches.

If a part of the Host Group name is provided like CVX during the search for host group
PA-CVXPt2, then you can navigate only through the Pool branches.

Pools are traversed in only pool and snap pool branches.

When searching for LDEVs in the Host Group branches, only the LDEVs present in HostGroup
-> Ldevs branch is highlighted. The LDEVs present in HostGroup ->RG ->Physical Ldevs branch
and HostGroup ->RG ->Pool Ldevs branch is not traversed.

Filtering is not supported for sub nodes that are under HostGroup->LDEVs->PVol, that is, filtering
is not supported for the components that are in S-Vols , S-Vols ->Pool-ID, S-Vols -> Pool-ID ->
Ldevs, S-Vols ->Pool-ID -> Ldevs -> RGs.

Searching for components

131

This manual is related to the following products: