HP 3PAR T-Class Storage Systems - Manual (Page 98)

3PAR InForm Management Console 4.1.0 User’s Guide
98 320-200231 Rev A
SSD Allocated
Percentage The percentage of used SSD capacity. The bottom of the SSD
Allocated Percentage column displays the total used percentage.
Note: The device types displayed in the summary are dependent on the devices installed in
your system. For example, if you have Near Line and disk drives installed, the summary will
display NL (Near Line) Total, NL Allocated Percentage columns.
The Summary tab can be further filtered to view drive cage connectivity and drive cage
capacity.
Viewing_Drive_Cage_Connectivity
Viewing_Drive_Cage_Capacity
Viewing Drive Cage Connectivity
To view drive cage connectivity information, select Connectivity from the filter list.
The connectivity summary appears as follows:
The following information is provided:
Column Description
Name The drive cage name.
State The drive cage state. See System and Component Status Icons .
Position A
Distance the drive cage is from the controller node port. (0 = directly
connected to InServ ports, 1= there is one device between the node and
this drive cage, etc).
Revision A
Version of firmware running on the controller for the A loop.
Position B
Distance the drive cage is from the controller node port. (0 = directly
connected to InServ Storage Server ports, 1= there is one device
between the node and this drive cage, etc).
Revision B Version of firmware running on the controller for the B loop.