HP 3PAR T-Class Storage Systems - Manual (Page 103)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 103
Column Description
Interface
Card
Interface card number, as assigned by the system.
SFP SFP number, as assigned by the system.
State The drive cage state. See System and Component Status Icons .
Manufacturer
The SFP manufacturer.
Max Speed The maximum speed of the SFP in Gbps.
TX Disable Displays whether the transmit laser is disabled.
TX Fault Displays whether the transmit laser has a problem.
RX Loss
Displays whether the receive end of the SFP is experiencing a loss of
signal from the host or drive cage.
RX Power
Low
Displays whether the SFP receive power is low.
DDM Support
Displays whether the SFP is DDM-capable (Digital Diagnostic
Monitoring).
The following information appears in the lower tab:
Group Field Description
General
Interface Card Interface card number, as assigned by the system.
SFP SFP number, as assigned by the system.
State Current condition of the SFP.
Manufacturer
Manufacturer of the SFP.
Part Number Part number of the SFP.
Serial Number Serial number of the SFP.