Pinging rcip links, Configuring and pinging the remote copy links, Pinging the remote copy links – HP 3PAR T-Class Storage Systems User Manual

Page 383

3PAR InForm Management Console 4.1.0 User’s Guide

320-200231 Rev A

383

See also:

Viewing Remote Copy Links

Selecting Multiple Items

Pinging RCIP Links

When

creating

Remote Copy over IP (RCIP) links, you are provided the opportunity to

configure

and

ping

the link ports to verify their validity and communication.

When pinging RCIP link ports:

You can click Details in the Port Configuration or Ping dialog boxes to show or hide

details about the configuration or ping operation, respectively.

If the MTU value of the ports is different, for example one value 1500 and the other value

9000, the lower packet size (1500) is used during the ping operation.

If both ports' MTU values are 9000, Jumbo Ping is displayed as the Ping group box title.

Configuring and Pinging the Remote Copy Links

Clicking Apply after entering or changing the requested link information during Remote
Copy link creation results in the entered configuration first being tested to check its validity,

and then proceeding with the ping operation to check communication between the link
ports. The ping is not executed if the configuration fails.

Pinging the Remote Copy Links

Clicking Ping after entering or changing the requested link information during Remote Copy

link creation results in a ping operation on the entered link ports.