Editing a common provisioning group – HP 3PAR T-Class Storage Systems User Manual

Page 247

3PAR InForm Management Console 4.1.0 User’s Guide

320-200231 Rev A

247

Step 2. Allocation Settings

1. From the Availability list, select Cage (default), Port, or Magazine.

2. From the Set Size list, select default, 32, 64, 128, 256, or 512 KiB. The default value

depends on raid type and device type used. If FC or NL drives are used, the step size
defaults to 256 KiB for RAID 0 and RAID 1, and 128 KiB for RAID 5. If SSD drives are

used, the step size defaults to 32 KiB for RAID 0 and RAID 1, and 64 KiB for RAID 5.
For RAID 6, the default is a function of the set size.

3. From the Preferred Chunklets list, select Fast (default) or Slow.
4. Click Next to use the Disk Filter (if enabled), or click Finish.

Step 3. Disk Filter
The Disk Filter displays the physical disks used. Pattern displays the parameters of the

disks used.
To modify the list of disks used:

1. Click the Filter icon.
2. See

Filtering

for details.

3. Click Next to view summary information, or click Finish.

Step 4. Summary

Review the summary information and when satisfied, click Finish.