HP 3PAR T-Class Storage Systems - Manual (Page 458)

3PAR InForm Management Console 4.1.0 User’s Guide
458 320-200231 Rev A
Note: In the screen output above, the Physical Disks tab has been accessed
from the InServs node (all connected storage server) level on the
Management Tree. If the Physical Disks tab was accessed from the
Management Tree via a specific server node (for example, s424), the
resulting information displayed on the Physical Disks tab does not display
the System column.
The Cage Subsystems Physical Disks tab displays the following information:
Column Description
System The InServ Storage Server name.
Name The disk name in node:slot:port format.
Manufacturer The manufacturer of the disk.
Model/Part Number The model and/or part number of the disk.
Serial Number The disk's serial number.
Firmware Version The disk's firmware version.
Device Type
The type of physical disk; Fibre Channel (FC), Solid State
(SSD), or Nearline (NL).
Device Speed The speed of the disk, in K.
Note: The Device Speed number does not represent a rotational speed for the drives
without spinning media (SSD). It is meant as a rough estimation of the performance
difference between the drive and the other drives in the system. For FC and NL drives, the
number corresponds to both a performance measure and actual rotational speed. For an
SSD drive, the number is to be treated as relative performance benchmark that takes into
account in I/O per second, bandwidth, and the access time.
Total Capacity The total capacity of the disk, in GiB.
See also:
Manager Pane
Management Tree
Management Window
Viewing the Cage Subsystems Tab