HP 3PAR T-Class Storage Systems - Manual (Page 160)

3PAR InForm Management Console 4.1.0 User’s Guide
160 320-200231 Rev A
Configuring Fibre Channel Ports
To configure a Fiber Channel port, access the Fibre Channel Port Configuration wizard:
1. In the Manager Pane, click Systems.
2. In the Management Tree, select the system on which you wish to configure the port.
3. In the Common Actions Panel, click Configure FC Port.
The Fibre Channel Port Configuration wizard appears.
4. In the General group box:
a. System list - Select the system on which the port will be configured.
b. Port list - Select the port to be configured as a Fibre Channel port.
5. In the Settings group box:
a. Connection Mode list - Select the mode of the port as Disk, Host, or RCFC.
b. Connection Type list - Select whether the connection type is Loop or Point.
c. Unique Node WWN - Enable or disable the node WWN.
d. Configured Rate - Select Auto (default), 1 Gbps, 2 Gbps, or 4 Gbps.
e. VLUN Change Notification (VCN) - Enable or disable the VLUN change
notification.
f. Interrupt Coalesce - Enable or disable the interrupt coalesce.
g. Persona list - (For systems using InForm OS 2.2.4) Select the port persona.
6. Click OK.
See also:
Manager Pane
Management Tree
Common Actions Panel
Viewing Ports
Configuring iSCSI Ports
To configure an iSCSI port, access the iSCSI Port Configuration wizard:
1. In the Manager Pane, click Systems.
2. In the Management Tree, select the system on which you wish to configure the port.
3. In the Common Actions Panel, click Configure iSCSI Port.
The iSCSI Port Configuration wizard appears.