HP 3PAR T-Class Storage Systems - Manual (Page 167)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 167
Enabling a Remote Copy Interface
Note: This operation can only be performed on Remote Copy over IP (RCIP)
ports.
To enable a Remote Copy interface:
1. Access the ports Summary tab.
2. Right-click the disabled Remote Copy port you wish to enable and then click Enable
Interface in the menu that appears.
The Enable Interface dialog box appears.
3. Click Yes.
See also:
Viewing Port Summary Information
Disabling a Remote Copy Interface
Disabling a Remote Copy Interface
Note: This operation can only be performed on Remote Copy over IP (RCIP)
ports.
To disable a Remote Copy interface:
1. Access the ports Summary tab.
2. Right-click the Remote Copy port you wish to disable and then click Disable Interface
in the menu that appears.
The Disable Interface dialog box appears.
3. Click Yes.
See also:
Viewing Port Summary Information
Enabling a Remote Copy Interface