HP 3PAR T-Class Storage Systems - Manual (Page 360)

3PAR InForm Management Console 4.1.0 User’s Guide
360 320-200231 Rev A
configuration, the number of links between the Remote Copy systems, and the current
state of the links (whether the links are up or down).
You can optionally view the systems' physical connectivity by selecting the View Physical
Connectivity checKiBox at the lower left side of the pane. When selected, the image
displays the Remote Copy systems' port locations, the link IP addresses, and how the
ports are connected.
The right pane displays information about the Remote Copy links for each Remote Copy
system in tabular format. Transmitting links are displayed as the target system's name
under the Targets column. Receiving links are displayed as receive under the Targets
column. Additional information includes each link's port location, IP address, and status.
See also:
Manager Pane
Management Tree
Viewing Configured Remote Copy Systems
Viewing Remote Copy Targets
Remote Copy target definitions are descriptors on one Remote Copy system that identify
another a Remote Copy system. In a Remote Copy server pair, the servers are each defined
as targets, relative to each other, for Remote Copy operations.
To view Remote Copy targets:
1. In the Manager Pane, click Remote Copy.
2. In the Management Tree, click Targets under the Remote Copy Configuration node
for the Remote Copy targets you wish to view.
Information about the Remote Copy targets appears on two panes in the Management
Window:
The left pane displays a graphical representation of the selected Remote Copy
configuration. The image includes the type of Remote Copy relationship (Remote Copy
over IP or Remote Copy over Fibre Channel) between the servers in the Remote Copy
configuration, the names of the Remote Copy systems, and the current state of the
targets.
You can optionally view the systems' target labels by selecting the Show Target Labels
checKiBox at the lower left side of the pane. When selected, the image displays the
Remote Copy systems' target labels adjacent to the InServ Storage Server graphic
representing each system. For example, in the following image, the target of the InServ
Storage Server labeled S424 (Lab2) is 4 (Lab1):