HP 3PAR T-Class Storage Systems - Manual (Page 210)

3PAR InForm Management Console 4.1.0 User’s Guide
210 320-200231 Rev A
Working with Hosts
The Host Manager allows the following operations:
Creating Hosts
Editing Hosts
Removing Hosts
Adding Hosts to Host Sets
Exporting Virtual Volumes
Note: If you are a domain user, only information within the domain(s) you
have access to, will be visible.
See also:
Manager Pane
Management Tree
Creating Hosts
To create a host, access the Create Host wizard:
1. Click Hosts in the Manager Pane.
2. Click Create Host in the Common Actions Panel.
The Create Host wizard appears.
Step 1. General
1. In the General group box:
a. System - Select the system to create the new host.
b. Domain - Select the domain in which to create the new host. Select if not
applicable.
c. Name - Enter the host name.
d. Set Name - Select the host set in which to create the new host. Select if
not applicable.
e. Persona - Select the host persona.
• 1 = Generic; UARepLun, SESLun
• 2 = ALUA; UARepLun, RTPG, SESLun
• 6 = Generic (legacy)
• 7 = HPUX (legacy); VolSetAddr