Upper pane – HP 3PAR T-Class Storage Systems User Manual
Page 140
3PAR InForm Management Console 4.1.0 User’s Guide
140
320-200231 Rev A
The RCFC tab appears as follows:
The RCFC tab is divided into an upper pane and a lower pane. The upper pane displays a
summary of all RCFC ports in the system. The lower pane displays detailed information
about a single port selected from the upper pane.
Upper_Pane
Lower_Pane
Upper Pane
The upper pane presents the following information:
Column Description
Position
The port location in node:slot:port format.
State
The state of the port. See
System and Component Status Icons
.
Mode
Port firmware mode setting. Ports in Initiator mode are connected to
drive cages and ports in Target mode export to hosts. Suspended
mode is for target ports that have not yet been initialized by the system
(rare). Peer mode is for Ethernet ports.