HP Unified Extensible Firmware Interface - Manual (Page 91)

2. The following configuration options are available:
•
Use Current ROM (default)
•
Switch to Backup ROM
3. Press F10 to save your selection.
Figure 82 Advanced Options — ROM Selection screen
Setting NMI Debug Button
You can enable debug functionality when the system has experienced a software lock-up. The NMI
Debug Button generates an NMI to enable the use of the operating system debugger.
NOTE: When enabled, pressing the NMI Debug Button on the system board during normal
operation halts the system.
To set the NMI debug button:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced System ROM Options→NMI Debug Button and press
Enter.
2. Select one of the following options:
•
Enabled (default)
•
Disabled
3. Press F10 to save your selection.
Options include:
•
Enabled (default)
•
Disabled
Accessing the BIOS/Platform Configuration (RBSU) menu 91