beautypg.com

HP Unified Extensible Firmware Interface User Manual

Page 125

background image

Figure 115 Network Options screen

5.

View or update the following values, as needed:

MAC Address (read-only)—The MAC address of the selected iLO network interface.

Network Interface Adapter—Specifies the iLO network interface adapter to use. Select
ON to enable the iLO Dedicated Network Port. Select Shared Network Port to use the
Shared Network Port. Selecting OFF disables all network interfaces to iLO.

The Shared Network Port option is available only on supported servers.

For more information about the iLO NIC settings, see the HP iLO 4 User Guide.

Transceiver Speed Autoselect (iLO Dedicated Network Port only)—Enables iLO to negotiate
the highest supported link speed and duplex settings when connected to the network. This
option is available only when Network Interface Adapter is set to ON.

Transceiver Speed Manual Setting (iLO Dedicated Network Port only)—Sets the link speed
for the iLO network interface. This option is available only when Network Interface Adapter
is set to ON and Transceiver Speed Autoselect is set to OFF.

Transceiver Duplex Setting (iLO Dedicated Network Port only)—Sets the link duplex setting
for the iLO network interface. This option is available only when Network Interface Adapter
is set to ON and Transceiver Speed Autoselect is set to OFF.

VLAN Enable (Shared Network Port only)—Enables the VLAN feature.

When the Shared Network Port is active and VLAN is enabled, the iLO Shared Network
Port becomes part of a VLAN. All network devices with different VLAN tags will appear
to be on separate LANs, even if they are physically connected to the same LAN. This
option is available only when Network Interface Adapter is set to Shared Network Port.

VLAN ID (Shared Network Port only)—If you enabled VLAN, enter a VLAN tag. All network
devices that you want to communicate with each other must have the same VLAN tag.
The VLAN tag can be any number between 1 and 4094. This option is available only
when Network Interface Adapter is set to Shared Network Port.

DHCP Enable—Configures iLO to obtain its IP address (and many other settings) from a
DHCP server.

Accessing the iLO 4 Configuration Utility menu

125

This manual is related to the following products: