HP Unified Extensible Firmware Interface - Manual (Page 124)

Figure 114 iLO 4 Configuration Utility screen
5. Select an option, and then press Enter.
You can use the iLO 4 Configuration Utility to perform the following tasks:
•
“Configuring Network Options” (page 124)
•
“Configuring Advanced Network Options” (page 126)
•
“Managing iLO users by using the iLO 4 Configuration Utility” (page 128)
•
“Configuring access settings by using the iLO 4 Configuration Utility” (page 131)
•
“Viewing information about iLO” (page 133)
•
“Resetting iLO to the factory default settings by using the iLO 4 Configuration Utility”
(page 134)
•
“Resetting iLO by using the iLO 4 Configuration Utility” (page 136)
Configuring Network Options
You can use the iLO 4 Configuration Utility Network Options menu to configure basic iLO network
options.
To configure iLO network options:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration
Utility
→Network Options.
The Network Options screen appears.
124 Using the iLO 4 Configuration Utility