Editing or removing user accounts – HP Unified Extensible Firmware Interface User Manual
Page 130
10. Select Exit and Resume Boot in the main menu, and then press Enter.
11. When prompted to confirm the request, press Enter to exit the utility and resume the boot
process.
Editing or removing user accounts
You can use the iLO 4 Configuration Utility User Management menu to edit or remove local iLO
user accounts.
To edit or remove a local iLO user account:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2.
Restart or power on the server.
3.
Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4.
From the System Utilities screen, select System Configuration
→iLO 4 Configuration Utility→User
Management.
The User Management screen appears.
Figure 119 User Management screen
5.
Select Edit/Remove User, and then press Enter.
The User Management
→Edit/Remove User screen appears.
130 Using the iLO 4 Configuration Utility