HP Unified Extensible Firmware Interface - Manual (Page 119)

Figure 110 System Default Options — Restore Default Manufacturing Settings screen
Saving Default Settings
You can configure default settings as necessary and then save the configuration as the custom
default configuration. When the system loads the default settings, the custom default settings are
used instead of the manufacturing defaults.
To save custom default settings:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→System Default Options→User Default Options and press Enter.
2. Select one of the following options:
•
Save User Defaults—Saves the current settings as the system default settings.
•
Erase User Defaults—Erases the current user-defined default settings. Once deleted, you
can only restore these setting manually.
3. Press F10 to save your selections.
Accessing the BIOS/Platform Configuration (RBSU) menu 119