HP Unified Extensible Firmware Interface - Manual (Page 15)

1. From the System Utilities screen, select System Configuration
→BIOS/Platform
Configuration
→System Options.
The System Options screen appears.
Figure 5 System Options screen
2. Select one of the following options and press Enter.
•
Serial Port Options—Assigns COM port number and associated resources to the selected
physical serial port. Also, lets you assign the logical COM port address and associated
default resources for the Virtual Serial Port (VSP).
•
Network Boot Options—Configures network boot policies, such as enabling or disabling
a network boot for embedded NICs.
•
USB Options—Configures USB ports.
•
Processor Options—Configures processors.
•
UEFI Shell Options—Configures UEFI shell options.
Accessing Serial Port Options
This menu lets you configure the Embedded and Virtual Serial Port settings.
NOTE: For proper screen resolution, set the console resolution in the terminal software to 100x31.
To access serial port options:
•
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→System Options→Serial Port Options.
The Serial Port Options screen appears.
Options include:
•
“Setting the Embedded Serial Port” (page 16)
•
“Setting the Virtual Serial Port” (page 16)
Accessing the BIOS/Platform Configuration (RBSU) menu 15