HP Unified Extensible Firmware Interface - Manual (Page 13)

3 Accessing the System Configuration Menu
The System Configuration menu options control a wide variety of server configurations.
Figure 3 (page 13) shows the System Configuration portion of the UEFI System Utilities.
NOTE: You might also see options for your system devices such as embedded NIC. For example,
“Embedded FlexibleLOM Port 1.” These devices vary based on the particular system. Configure
the parameters for these devices as needed by selecting the device and pressing Enter.
To access the System Configuration menu:
1.
From the System Utilities screen, select System Configuration and press Enter.
The System Configuration screen appears.
Figure 3 System Configuration screen
2. Select an option and then press Enter. Options are:
•
“Accessing the BIOS/Platform Configuration (RBSU) menu” (page 13)
•
“Accessing Smart Array Controllers” (page 121)
•
“Using the iLO 4 Configuration Utility” (page 123)
Accessing the BIOS/Platform Configuration (RBSU) menu
The BIOS/Platform Configuration, formerly known as ROM-Based Setup Utility (RBSU), is embedded
in the system ROM of the HP ProLiant DL580 Gen8 servers. This menu lets you configure system
BIOS configuration settings.
Figure 4 (page 14) shows the BIOS/Platform Configuration (RBSU) portion of the UEFI System
Utilities.
To access the BIOS/Platform Configuration menu:
Accessing the BIOS/Platform Configuration (RBSU) menu 13