HP Unified Extensible Firmware Interface - Manual (Page 19)

Figure 9 Network Boot Options —UEFI PXE Boot Policy screen
Setting Network Boot Retry Support
You can set the network boot retry setting. By default, the system BIOS attempts to boot the network
device (for example, PXE device) up to 20 times before attempting to boot the next IPL device.
To set Network Boot Retry support:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→System Options→Network Boot Options →Network Boot Retry Support and press
Enter.
2. Select one of the following options:
•
Enabled (default)
•
Disabled
3. Press F10 to accept your selection.
Accessing the BIOS/Platform Configuration (RBSU) menu 19