HP Unified Extensible Firmware Interface - Manual (Page 94)

Figure 85 Advanced Options — PCI Bus Padding Options
Setting Power-On Logo
This option controls the display of the logo during system boot. This is an aesthetic modification
only and does not affect the system boot times.
To set power-on logo:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced System ROM Options→Power-On Logo and press
Enter.
2. Select one of the following options:
•
Enabled (default)
•
Disabled
3. Press F10 to save your selection.
94 Accessing the System Configuration Menu