HP Unified Extensible Firmware Interface - Manual (Page 132)

4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration
Utility
→Setting Options.
The Setting Options screen appears.
Figure 121 Setting Options screen
5. View or update the following values, as needed:
•
iLO 4 Functionality—The iLO network and communications with operating system drivers
are terminated when iLO functionality is disabled.
To re-enable iLO functionality, disable iLO security with the system maintenance switch,
and then use the iLO 4 Configuration Utility to set iLO Functionality to Enabled.
•
For more information about using the system maintenance switch, see the Maintenance
and Service Guide for your server model.
NOTE: The iLO functionality cannot be disabled on blade servers.
•
iLO 4 Configuration Utility—Enables or disables the iLO 4 Configuration Utility. If this
option is set to Disabled, the iLO 4 Configuration Utility menu item is not available when
you access the UEFI System Utilities.
•
Require Login for iLO 4 Configuration—Determines whether a user-credential prompt is
displayed when a user accesses the iLO 4 Configuration Utility. If this setting is Enabled,
a login dialog box opens when you access the iLO 4 Configuration Utility.
•
Show iLO 4 IP Address during POST—Enables the display of the iLO network IP address
during host server POST.
•
Local Users—Enables or disables local user account access.
132 Using the iLO 4 Configuration Utility