HP Unified Extensible Firmware Interface - Manual (Page 56)

Figure 46 PCI Device Enable/Disable screen
Setting the System Date and Time
Set the system time and date on the server.
To set the system date and time on the server:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Date and Time and press Enter. The Date and Time screen appears.
2. Select a device on your system from the list and press Enter.
3. Select Date (mm-dd-yyyy) and press Enter to set the date. Enter the date in a month-day-year
(mm-dd-yyyy) format.
4. Select Time (hh:mm:ss) and press Enter to the time. Enter the time in a 24–hour format
(hh:mm:ss) format.
5. Press F10 to save your selection.
56 Accessing the System Configuration Menu