HP Unified Extensible Firmware Interface - Manual (Page 86)

Figure 77 Server Asset Text — Administrator Information screen
NOTE: The number of characters allowed for each entry varies depending on server model. By
default, all values are blank.
Entering Service Contact Text
You can define reference information for the server administrator.
To enter service contact text:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Server Asset Text and select Service Contact Information and press Enter.
2. Enter an administrator name, phone number, secondary phone number and other information
as follows:
•
Service Contact Name—Defines the service contact’s name.
•
Service Phone Number—Defines the service contact’s phone number.
•
Service Contact E-mail Address—Defines the service contact’s e-mail address.
•
Service Contact Other Information—Defines additional text relating to the service contact.
3. Press F10 to save your selection.
NOTE: The number of characters allowed for each entry varies depending on server model. By
default, all values are blank.
86 Accessing the System Configuration Menu