HP Unified Extensible Firmware Interface - Manual (Page 123)

5 Using the iLO 4 Configuration Utility
The iLO 4 Configuration Utility is available in the HP UEFI System Utilities. iLO 4 Configuration
Utility has the following options:
•
Network Options
•
Advanced Network Options
•
User Management
•
Setting Options
•
About
•
Set to Factory Defaults
For more information, see the HP iLO 4 User Guide.
Accessing the iLO 4 Configuration Utility menu
The iLO 4 Configuration Utility is embedded in the system ROM of HP ProLiant servers that support
UEFI. This utility allows you to configure iLO 4 settings.
You can access the iLO 4 Configuration Utility from the physical system console, or by using an
iLO remote console session.
To access the iLO 4 Configuration Utility menu:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration Utility.
The iLO 4 Configuration Utility screen appears.
Accessing the iLO 4 Configuration Utility menu 123