HP Unified Extensible Firmware Interface - Manual (Page 50)

Figure 41 Advanced Power Management — Minimum Processor Idle Power Core State screen
Setting Minimum Processor Idle Power Package State
NOTE: This option is available on servers with Intel processors.
Configure the lowest processor idle power state (C-state). The processor automatically transitions
into package C-states based on the Core C-states in which cores on the processor have transitioned.
The higher the package C-state, the lower the power usage of that idle package state. Package
C6 (non-retention) is the lowest power idle package state supported by the processor. Configure
this option only when HP Power Profile is set to Custom.
To set minimum processor idle power package state:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Power Management→Advanced Power Options→Minimum Processor Idle Power
Package State and press Enter.
2. Select one of the following options:
•
Package C6 (retention) State
•
Package C6 (non-retention) State
•
No Package State
3. Press F10 to save your selection.
50 Accessing the System Configuration Menu