Setting uefi optimized boot – HP Unified Extensible Firmware Interface User Manual
Page 42
Figure 33 Boot Mode screen
Setting UEFI Optimized Boot
Configure the system to use native UEFI graphic drivers when booting to the UEFI Boot Mode. This
option needs to be enabled to configure Secure Boot. For more information, see
for more information. Set the Boot Mode to UEFI before you can configure
this option. See
“Selecting a Boot Mode” (page 41)
for detailed information.
NOTE:
This option must be disabled, when using Microsoft Windows 2008 R2 in UEFI Boot
Mode because Legacy BIOS components are needed for video operations in Windows.
To set the UEFI Optimized Boot:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Boot Options→UEFI Optimized Boot and press Enter. The UEFI Optimized Boot screen
appears.
2.
Select one of the following options:
•
Enabled—Configures the system BIOS to boot using native UEFI graphic drivers.
•
Disabled (default)—Configures the system BIOS to boot using INT10 legacy video
expansion ROM. This setting needs to be disabled to boot Windows Server 2008 R2 in
UEFI Boot Mode. This option cannot be disabled if Secure Boot is enabled. Configure
this option only if Boot Mode is set to UEFI. For more details, see
3.
Press F10 to save your selection.
4.
Reboot the server for the change to take effect.
42
Accessing the System Configuration Menu